Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
learn:libraries:linx:misc:linx-internals [2016/04/22 01:08]
sharpk
learn:libraries:linx:misc:linx-internals [2016/06/01 16:58] (current)
sharpk
Line 4: Line 4:
 ==== Remote I/O ==== ==== Remote I/O ====
 {{:​learn:​libraries:​linx:​misc:​linx_arch_remoteio.png|}} {{:​learn:​libraries:​linx:​misc:​linx_arch_remoteio.png|}}
-Remote I/O works primarily ​by running LabVIEW VIs on the development PC.  In this configuration the LINX VIs send commands to LINX firmware running on a device connected to the development computer by a USB, WiFi, or ethernet ​network.  These commands tell the firmware to perform pre-defined actions such as reading an analog input or setting a digital output high.  ​Protocol Info here.+Remote I/O works by running LabVIEW VIs on the development PC.  In this configuration the LINX VIs send commands to LINX firmware running on a device connected to the development computer by a USB, WiFi, or ethernet ​connection.  These commands tell the firmware to perform pre-defined actions such as reading an analog input or setting a digital output high.  ​Devices that use Remote I/O are arduinos, chipKITs, ESP8266s, and many others. Details on how the protocol works and information on specific commands is available [[:​learn:​libraries:​linx:​spec:​start|here]].
  
-The LINX firmware (source code available [[https://​github.com/​MakerHub/​LINX|here]]) can be built for many different devices.  ​Device ​IDs+The LINX firmware (source code available [[https://​github.com/​MakerHub/​LINX|here]]) can be built for many different devices.  ​A list of the currently supported devices and their IDs is available [[:​learn:​libraries:​linx:​supported_devices|here]]. ​ A reference to many of the functions in the firmware source code is available [[:​learn:​libraries:​linx:​reference:​firmware:​start|here]].
  
-Custom commands+Custom commands ​can be added to the LINX firmware. ​ This is useful if you want to make a new firmware library available for use by LINX.  A guide to creating custom commands in the LINX firmware is available [[:​learn:​tutorials:​libraries:​linx:​misc:​adding_custom_command|here]].
  
 ==== Local I/O ==== ==== Local I/O ====
 {{:​learn:​libraries:​linx:​misc:​linx_arch_localio.png|}} {{:​learn:​libraries:​linx:​misc:​linx_arch_localio.png|}}
 +Local I/O is used on devices that can execute LabVIEW VIs directly without help from a development PC.  Devices that use Local I/O are Linux-based devices like myRIO, Raspberry Pi 2/3, and BeagleBone Black.
 +
 +In this configuration,​ VIs are written on the development PC, then deployed and run on the target via a TCP connection with the LabVIEW run-time engine running on the target. ​ While the VIs are running on the target, debugging information and front panel values is transferred between the target and the development PC.  When a VI is running on the target with live front panel data on the dev PC, this is called Interactive Mode.
 +
 +The LabVIEW run-time engine on the target runs inside a [[https://​en.wikipedia.org/​wiki/​Chroot|chroot]],​ which is a Linux construct that is similar to a virtual machine. ​ This allows the LV run-time to be installed and run safely on many different Linux operating systems. ​ The chroot is located at ''/​srv/​chroot/​labview/''​ on the target.
 +
 +The LabVIEW run-time chroot can be controlled via a [[https://​en.wikipedia.org/​wiki/​Systemd|systemd]] service, labview.service. ​ Systemd is also responsible for starting the LabVIEW chroot when the target boots.
 +
 +A utility server called the NI System Server runs outside of the chroot. ​ This server script performs several utility functions such as allowing the LabVIEW run-time to be restarted remotely via HTTP requests.
 +
 +LabVIEW VIs running on the target utilize the LINX firmware, compiled as a Linux shared object liblinxdevice.so,​ in order to access I/O on the target. ​ The LINX shared object contains the logic necessary to access I/O on the specific target board.
  
 ==== Local I/O with a Startup Executable ==== ==== Local I/O with a Startup Executable ====
 {{:​learn:​libraries:​linx:​misc:​linx_arch_localio_startup.png|}} {{:​learn:​libraries:​linx:​misc:​linx_arch_localio_startup.png|}}
 +
 +Local I/O has a final mode it can be used in via a startup executable. ​ As shown in the diagram above, a development PC is no longer needed in this configuration,​ since the startup executable is run automatically when the target boots. ​ [[:​learn:​tutorials:​libraries:​linx:​3-0:​deploy-startup-exe|This tutorial]] demonstrates how to create a startup executable.
 +
 +The only difference in this mode is that the front panels are no longer visible since the development PC is not controlling the execution of the application'​s VIs.  This mode is "​headless"​ in the sense that there is not a built-in user interface. ​ It's usually best used after the initial debugging and development of the application is complete.
 +
 +Note that although startup executables are called "​executable"​ they do not function like normal Linux programs and can't be invoked from the command line.  Creation and deployment of the startup app is controlled from the development PC.