This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~ ~ NOTOC~ ~
Set the pulse width of the specified servo channel.
A pulse width of 1500uS is typically the center point of rotation (90 degrees). Most servos can rotate between 1000 and 2000 uS but the actual limits will vary depending on the specific servo.s
LINX Resource Contains LINX connection resources.
Servo Channels Specifies the LINX device servo channels to update.
Pulse Widths (uS) Specifies the pulse widths in uS to send to the servos. A pulse width of 1500uS is typically the center point of rotation (90 degrees). Most servos can rotate between 1000 and 2000 uS but the actual limits will vary depending on the specific servo.
Error In Describes error conditions that occur before this node runs. This input provides standard error in functionality.
Error Out Contains error information. This output provides standard error out functionality.
Servo Servo Close N Channels Servo Servo Close One Channel Servo Servo Open N Channels Servo Servo Open One Channel Servo Servo Set Pulse Width One Channel LINX VI Reference