Disconnect

Disconnect from the LINX device.

If connected via TCP this command should close the TCP connection on the Host and device.

LabVIEW

Developer Note

Command Packet

  • Disconnect Command
  • Disconnect Response
  • Disconnect Command
    Description Disconnect from the LINX device.
    Size 7 Bytes
    Format
    -
    0
    1
    2
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    N/A
    SoF : 0xFF
    PACKET SIZE : 0x07
    PACKET NUM
    3
    4
    5
    6
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    PACKET NUM
    CMD : 0x0017
    CHECKSUM
    SoF Start of Frame. Always 0xFF.
    PACKET SIZE Packet Size In Bytes
    PACKET NUM The Current Packet Number. This value increments with each new packet.
    CMD Disconnect Command.
    CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

    LINX Target

    Developer Note

    Response Packet

    Disconnect Response
    Description LINX device's response to Disconnect Command.
    Size 6 Bytes
    Format
    -
    -
    0
    1
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    N/A
    SoF : 0xFF
    PACKET SIZE : 0x06
    2
    3
    4
    5
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    PACKET NUM
    STATUS
    CHECKSUM
    SoF Start of Frame. Always 0xFF.
    PACKET SIZE Total packet size in bytes.
    PACKET NUM The packet number of the packet that generated the response.
    STATUS See Return Status section below.
    CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

    Return Status

    No function specific statuses. See return_status for universal return statuses.