PWM Set Duty Cylce

Set the duty cycle of the specified PWM channels.

LabVIEW

Developer Note

Command Packet

  • Analog Read Command
  • Analog Read Response
  • Analog Read Command
    Description Reads the value (high or low) from the specified digital pin(s).
    Size Variable
    Format
    -
    -
    0
    1
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    N/A
    SoF : 0xFF
    PACKET SIZE
    2
    3
    4
    5
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    PACKET NUM
    CMD : 0x0083
    6
    7
    8
    9
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    NUM PIN(S)
    PIN NUM(S)
    DUTY CYCLE(S)
    CHECKSUM
    SoF Start of Frame. Always 0xFF.
    PACKET SIZE Packet Size In Bytes
    PACKET NUM The Current Packet Number. This value increments with each new packet.
    CMD Analog Read Command.
    NUM PIN(S) Number of PWM pins to write to.
    PIN NUM(S) Variable Length. The PWM pin numbers. Each byte represents one pin.
    DUTY CYCLE(S) Variable Length. Duty cycle (0-255) for each PWM pin. MSB duty cylce corresponds to MSB PWM pin.
    CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

    LINX Target

    Developer Note

    Response Packet

    Analog Read Response
    Description LINX device's response to Analog Read command
    Size 6 Bytes
    Format
    -
    -
    0
    1
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    N/A
    SoF : 0xFF
    PACKET SIZE
    2
    3
    4
    5
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    PACKET NUM
    STATUS
    CHECKSUM
    SoF Start of Frame. Always 0xFF.
    PACKET SIZE Total packet size in bytes.
    PACKET NUM The packet number of the packet that generated the response.
    STATUS See Return Status section below.
    CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

    Return Status

    No function specific statuses. See return_status for universal return statuses.