Set Device WIFI Security Type

Set the LINX device's WIFI Security Type.

LabVIEW

Developer Note

N/A

Command Packet

  • Set Device WIFI Security Type
  • Set Device WIFI Security Type Response
  • Set Device WIFI Security Type
    Description Set the LINX device's WIFI Security Type.
    Size 8 Bytes
    Format
    0
    1
    2
    3
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    SoF : 0xFF
    PACKET SIZE : 0x08
    PACKET NUM
    4
    5
    6
    7
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    CMD : 0x001E
    Security Type
    CHECKSUM
    SoF Start of Frame. Always 0xFF.
    PACKET SIZE Packet Size In Bytes
    PACKET NUM The Current Packet Number. This value increments with each new packet or repeats for a multi packet command.
    CMD Set Device WIFI Security Type Command.
    Security Type WIFI Security Type.
    CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

    LINX Target

    Developer Note

    N/A

    Response Packet

    Set Device WIFI Security Type Response
    Description LINX device's response to Set Device WIFI Security Type Command
    Size 6 Bytes
    Format
    -
    -
    0
    1
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    N/A
    SoF : 0xFF
    PACKET SIZE : 0x06
    2
    3
    4
    5
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    7
    6
    5
    4
    3
    2
    1
    0
    PACKET NUM
    STATUS
    CHECKSUM
    SoF Start of Frame. Always 0xFF.
    PACKET SIZE Total packet size in bytes.
    PACKET NUM The packet number of the packet that generated the response.
    STATUS See Return Status section below.
    CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

    Return Status

    No function specific statuses. See return_status for universal return statuses.