Page 1 of 1

Raspberry Pi-4, LabVIEW, & USB-6008

PostPosted: Wed Jan 01, 2020 7:10 pm
by Orchitis
Has anyone used the Raspberry Pi-4 to run a LabVIEW executable Vi to gather data from a National Instruments USB-6008?

Thanks for any info or advice in advance.

Re: Raspberry Pi-4, LabVIEW, & USB-6008

PostPosted: Thu Jan 09, 2020 4:31 am
by toshas
You are able to use LINX on RPI4.
LINX is incompatible with USB-6008.
If you need Analog IO look at RPI HAT with ADC/DAC.
Just an example - https://www.waveshare.com/wiki/High-Pre ... D/DA_Board

p.s. another option is Analog Discovery and RPI (without LINX at all)
https://blog.digilentinc.com/analog-dis ... erry-pi-4/